xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
246
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the route preference for static routes to 70:
DGS-3620-28SC:admin# config route preference static 70
Command: config route preference static 70
Success.
DGS-3620-28SC:admin#
18-2
show route preference
Description
This command is used to display the route preference of each route type.
Format
show route preference {[local | static | default | rip | ospf | ospfIntra | ospfInter | ospfExt1 |
ospfExt2 | ebgp | ibgp]}
Parameters
local
- (Optional) Specifies to display the preference of local route.
static
- (Optional) Specifies to display the preference of static route.
default
- (Optional) Specifies to display the preference of default route.
rip
- (Optional) Specifies to display the preference of RIP route.
ospf
- (Optional) Specifies to display the preference of all types of OSPF route.
ospfIntra
- (Optional) Specifies to display the preference of OSPF intra-area route.
ospfInter
- (Optional) Specifies to display the preference of OSPF inter-area route.
ospfExt1
- (Optional) Specifies to display the preference of OSPF external type-1 route.
ospfExt2
- (Optional) Specifies to display the preference of OSPF external type-2 route.
ebgp
- (Optional) Specifies to display the preference of BGP AS-external route.
(EI Mode Only
Parameter)
ibgp
- (Optional) Specifies to display the preference of BGP AS-internal route.
(EI Mode Only
Parameter)
Restrictions
None.
Example
To display the route preference for all route types:
