xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
378
Format
config dhcpv6 pool ipv6network_addr <pool_name 12> begin <ipv6networkaddr> end
<ipv6networkaddr>
Parameters
<pool_name 12>
- Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
begin
- Specifies the beginning IPv6 network address of the DHCPv6 pool.
<ipv6networkaddr>
- Enter the beginning IPv6 network address of the DHCPv6 pool here.
end
- Specifies the ending IPv6 network address of the DHCPv6 pool.
<ipv6networkaddr>
- Enter the ending IPv6 network address of the DHCPv6 pool here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the range of ipv6network address for the DHCPv6 pool pool1:
DGS-3620-28SC:admin# config dhcpv6 pool ipv6network_addr pool1 begin 2000::1/64
end 2000::32/64
Command: config dhcpv6 pool ipv6network_addr pool1 begin 2000::1/64 end
2000::32/64
success
DGS-3620-28SC:admin#
25-5
config dhcpv6 pool domain_name
Description
This command is used to configure the domain name for the DHCPv6 pool of the Switch. The
domain name configured here will be used as the default domain name by the client.
By default, the domain name is empty. If domain name is empty, the domain name information will
not be provided to the client.
Format
config dhcpv6 pool domain_name <pool_name 12> <domain_name 255>
Parameters
<pool_name 12>
- Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
<domain_name 255>
- Enter the domain name used here. This name can be up to 255
characters long.
