xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
571
3 172.18.0.0/21 TCP 3 Active
DGS-3620-28SC:admin#
47-26
show jwac ports
Description
This command is used to display the port configuration of JWAC.
Format
show jwac ports {<portlist>}
Parameters
<portlist>
- (Optional) Specify a port range to show the configuration of JWAC.
Restrictions
None.
Example
To display JWAC ports 1 to 4:
DGS-3620-28SC:admin#show jwac ports 1-4
Command: show jwac ports 1-4
Port State Aging Time Idle Time Block Time Max
(min) (min) (sec) Hosts
----- -------- ---------- --------- ---------- -----
1 Disabled 1440 Infinite 60 100
2 Disabled 1440 Infinite 60 100
3 Disabled 1440 Infinite 60 100
4 Disabled 1440 Infinite 60 100
DGS-3620-28SC:admin#
47-27
clear jwac auth_state
Description
This command is used to clear authentication entries.
Format
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating | blocked} |
mac_addr <macaddr>]
