6
Rear Panel
FM/AM antenna terminals (ANTENNA)
Used to connect FM and AM antennas.
Speaker terminals (SPEAKERS)
Used to connect speakers.
Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
AC inlet (AC IN)
Used to connect the power cord.
HDMI connectors
Used to connect devices equipped with HDMI connectors
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
Network connector (NETWORK)
Used to connect this unit to the network.
PRE OUT connectors
Used to connect a subwoofer with a built-in amplifier or an external power amplifier.
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this unit and
external devices from a different room.
Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
RS-232C connector
The RS-232C serial port is provided to allow compatibility with an external home
automation controller. Consult the owner’s manual of the home automation controller
for more information about serial control of this unit. The serial port allows two-way
control and status via an external home automation controller.
NOTE:
Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
