Specifications – Audio Section
Audio section
Power amplifier
Rated output
Front
125 W + 125 W (8
Ω/
ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center
125 W (8
Ω/
ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W (6
Ω/
ohms, 1 kHz with 0.7 % T.H.D.)
Surround
125 W + 125 W (8
Ω/
ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back / Front height / Front
wide/
125 W + 125 W (8
Ω/
ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power
130W x 2-
channel (8 Ω/ohms)
190W x 2-
channel (4 Ω/ohms)
Output connector
6 –
16 Ω/ohms
Analog
Input sensitivity/Input impedance
200 mV/47
kΩ
/kohms
Frequency response
10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N
102 dB (IHF–A weighted, Direct mode)
Distortion
0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output
1.2 V
Digital
D/A output
Rated output
2 V (at 0 dB playback)
Total harmonic distortion
0.008 % (1 kHz, at 0 dB)
S/N ratio
102 dB
Dynamic range
100 dB
Digital input
Format
Digital audio interface
Phono equalizer
Input sensitivity
2.5 mV
RIAA deviation
±1 dB (20 Hz to 20 kHz)
S/N
74 dB (A weighting, with 5 mV input)
Rated Output
150 mV
Distortion factor
0.03 % (1 kHz, 3 V)
18
