Reset
HOME
ACCESSORIES
WARRANTY 2
10
Power/Standby
button
“SURROUND
MODE” button
“AUTO”
button
“MENU”
button
“BAND”
button
“ENTER”
button
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
Various setting details can be saved and reset on this device. If setting details are saved before returning to the default values, after returning
to the default settings, setting details can be returned to the same values as before returning to the defaults.
Procedure to Save Settings
Skip this step if you want to return all of the settings to factory default.
When the power is ON, press and hold “BAND” and “ENTER” for more than 3 seconds.
After “MEMORY SAVING” is shown on the display, “COMPLETE”is shown to inform you that the settings have been saved.
Reset procedure:
Turn off power using “ON/STANDBY”
With the power off, press and hold the “SURROUND MODE” button, “AUTO” button, and “POWER” button simultaneously on the AVR for a
few seconds until the AVR’s display starts flashing at intervals of about 1 second.
Perform the next step only If the settings were saved as explained on the previous step, “Procedure to Reload Settings”.
Procedure to Reload Settings:
Press and hold “BAND” and “MENU” for more than 3 seconds.
After “MEMORY LOAD” is shown on the display, “COMPLETE” is shown to inform you that the
settings have returned to those saved previously
All manuals and user guides at all-guides.com
