background image

Chapter 11.  Appendix  139 

 

 

IP (Internet Protocol).

    The standard by which packets of information are transmitted 

over the Internet. 

IrDA (Infrared Data Association protocol).

    An established standard for infrared 

communications between computers and other peripherals and devices. 

ISP (Internet service provider).

    A commercial business that provides Internet access 

to individuals or businesses, usually for a fee. 

LAN (local area network).

    A group of computers, usually in close proximity (either in 

the same building or in buildings in close proximity), that are linked together to share files 
and exchange data. 

Modem.

    A communication device that enables a computer to transmit data over 

telephone lines. 

NIC (network interface card).

    A card installed in a computer so that it can be 

connected to a network. NICs can provide a dedicated, full-time connection to a network. 

Partnership.

    An established relationship between your DOT 320 and your desktop PC 

for the purpose of synchronizing and transferring data. 

PIM (personal information manager).

    An application or set of applications that 

organizes information such as addresses, appointments, and notes. 

POP3 (Post Office Protocol v3).

    A protocol that enables a computer to retrieve 

messages from a mail server. 

PPP (Point-to-Point Protocol).

    The default method your DOT 320 uses to 

communicate with an ISP or network server. 

Proxy server.

    A server that sits between a client computer or Web browser and the 

Internet. A proxy server provides security by filtering requests and can improve performance 
by storing local copies of requested information. 

RAM (random access memory).

    Volatile memory that can be read and written. Data 

stored in RAM is retained only while power is maintained. 

Remote connection.

    A connection between your DOT 320 and a remote computer or 

server. 

Reset.

    The process of restarting your DOT 320 and reinitializing the operating system. 

Performing a reset erases any unsaved data in open documents, but preserves data that 
has been saved. 

Restore.

    To return your device to the state it was in when data was last backed up. This 

involves copying your backup data to your DOT 320.   

Summary of Contents for DOT 320




















































































































































Reviews: