C. Wired and Wireless Setting
Wired Setting
On the
Search Tools
folder double click the
Search
icon
and the following screen should
appear. The Default IP address of the Wireless IP Camera is 192.168.1.128
The Search should find the camera’s IP Address automatically.
Change the IP Camera network parameters by selecting then click
Modify
.
Change the following network parameters:
Click OK
Note: PC network parameters and IP Camera parameters must belong to the same network segment to
access the IP Camera. First of all, the Gateway and IP Mask (Subnet Mask) should be the same and the
second,
IP address is also in the same paragraph, such as:
IP address of the camera is 192.168.100.128
PC's IP address must be in the 192.168.100.1~254 range (except 192.168.100.128). If the PC's network
parameters network parameters and the camera is inconsistent, you need to change the network
settings of the camera enables you to access the camera.
This is your PC’s IP Address
