www.securemme.it | E-mail: info@securemme
9
D-SMART INSTALLATION
5.
Install the housing motor on the stem of the cylinder un l it stops, ensuring the alignment of the flat surface of the
stem with the housing motor.
6
. Fix the housing motor by ghtening the screw with a 8mm hex wrench.
7.
Place the ba ery support plate on the panel.
8.
Install and thighten the handle and the knob on the cylinder
6.
Fix on the panel the ba ery support plate with the 3 screws provided.
7.
Insert the ba ery un l is stops and try to make the first test, by pressing the opening and closing bu ons.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
