28
Layer
•
Synthesis
2
Next three parameters control sound pitch andits influence on the filter's frequency:
•
Range
– Pitch transposition by whole octaves:
•
16' – Pitch non-transposed.
•
8' – Pitch transposed by +1 octave.
•
4' – Pitch transposed by +2 octaves.
•
2' – Pitch transposed by +3 octaves.
•
Tracking
– Turned on by default. When tracking is turned on, the pitch of incoming midi notes is taken into
account when a sound is generated. If we turn off the
Tracking
, the pitch of incoming midi notes is ignored
by
LuSH-101
and the frequency is constant (controlled by
Frequency
parameter described below). In
consequence, no matter what key we press on the keyboard, the sound will have exactly the same frequency.
•
Frequency
– It is the absolute frequency of
VCO
(from 20 Hz to 8 kHz), this parameter works only when
Tracking
is turned off (described above).
•
Tracking Kybd. Affect
– When Keyboard Affect is turned on, both parameters,
Range
and
Frequency
(when
Tracking
is turned off), are taken into account by filter keyboard tracking.
Vco frequency tracking diagram
