Page
15
of 61
SK2019 FCSD 1V-01-EC-001_1
Installation Location
Do not install the unit in rooms where flammable gas or alkaline acid substances are present. Aluminum/copper coils
and/or internal plastic components can be damaged irreparably.
Do not install in workshops or kitchens; drawn in oil vapors might deposit on the coils and alter their performance or
damage the internal plastic parts of the unit.
If installation of unit includes using a lift, insert a plywood sheet between the unit and the lift forks to avoid damaging
unit. (Figure B.5.1)
It is recommended to locate the unit near one side of room to ensure optimum air distribution. (Figure B.5.2)
Generally, the best louver position is the one which allows air diffusion along the ceiling. Alternative positions can be
selected.
Confirm sufficient space is provided to allow removal of panels from the ceiling in the selected position and to allow
enough clearance for maintenance and servicing operations.
Figure B.5.1
Figure B.5.2
