Da-Lite EXECUTIVE ELECTROL, Instruction Book

4

Restoring Roller Wrap

Executive Electrol

®

 Installation

CAUTION! Do not attempt to restore a lost wrap  
by adjusting limit switches!

1.  Run fabric all the way down.

2.  Run fabric up and stop just before door closes.

3.  Remove the access panel (2 screws, Fig. 3).

4.  Two people with clean hands must carefully grasp the slat 

pocket at each end.

5.  Gently lift fabric up and ease it over the top of the roller.

CAUTION! Be careful not to crease or damage fabric.

6.  Additional wraps must be restored if screen surface continues 

to hang beyond bottom of case.

7.  Test screen by running fabric up and down several times.

8.  Replace access panel.

3 1⁄2"

9 1⁄2"

2 3⁄16"

4 1⁄2"

False Top

Mounting 
Brackets
3⁄16" Thick

“L” Bracket

Electrical Outlet

Fabric  

Height x Width 

As Ordered, Up 

To 16' x 16'

Suggested Methods of Installation

TYPE 1 & 2

Offset mounting,

 recessed above  

ceiling, for plaster, dry wall or paneling. 
Door painted same finish as ceiling.

TYPE 1 & 2

Allow 1⁄8" min. clearance all around surface door.

Flush mounting

, recessed above ceiling. For use 

with 1/4" max. paneling or installation in existing 
ceiling using molding around door.

TYPE 3

Allow 1/4" min. clearance all around  
surface door.

Extended mounting,

 recessed above 

ceiling. For use with acoustical or other 
ceiling tile 3⁄4" thick laid over door.

NOTE: 

Paint the same as 

doors and ceiling or remove 
and replace with ceiling tile.

Including Mounting Brackets

Ceiling Tile

3⁄4"

3⁄8"

 Approx.

Filler Block

3⁄4"

False Top

1/4" Max.

1⁄8"

2 1⁄2"

1/4"

Picture 

Surface

Mounting  
Brackets

False Top

Surface Door

Access Door

3⁄4"

1/4" x 1" Screw 
& Nut Insert

Drywall Screw

“L” Bracket

1/4" x 2"  

Lag Screw

False Top

SHIM

3"

9 7⁄8"
9 1⁄2"

8"

12 1⁄16"

Length of Fabric Width

+ 26 1⁄2", All Sizes

22"

12 1⁄16"

11 5⁄16"

4 3⁄4"

12 1⁄16"