EN
Mounting
1.
Decide whether you want to use the 90 degree arrangement (figure 2a, follow step 2a) or
the inline arrangement (figure 2b, follow step 2b) in your kitchen cabinet (dependent on the
available room). Both arrangements can also be applied mirrored vertically.
2a.
Mount the 15x12mm knee joint onto the safety valve assembly , by means of the 15 mm
pipe . Next mount the 12 mm pipe onto the 15x12 mm knee joint .
2b.
Mount the 12 mm pipe onto the safety valve assembly , by means of the 12x15 mm
reducer .
3.
Mount the mixing valve onto the 12 mm pipe .
4.
Install your tap if this has not already been installed. Follow the instruction manual of
your tap for this.
5.
Connect the ‘female thread’ coupling of the boiling water T-piece with the boiling water
hose of your tap using one of the two sealing rings .
Assembly
Assembly instructions Combi installation kit
B
E
D
F
A
H
1
2
C
1
3
E
D
D
2
250 mm
30
0 mm
1
E
D
C
A
B
min. 400 mm
23
0 mm
1
A
B
D
H
Female Thread
Male Thread
B
Figure 2a
Figure 3
Figure 2b
07.98.92.033 Handleiding Combi Installatieset_NMRS.indd 8
5-7-10 16:29
