12
1. To pair the remote with the vehicle, install two AAA 1.5V batteries. Un-
screw and push the battery cover open on the back of the remote.
Please pay attention to the positive and negative polarity in the battery
holder. After installing batteries, close the battery cover.
2. Hold the “Forward” and “Backward” key together (up and down key) for
3 seconds. The light on the center will start to flash - this indicates the
pairing has initiated.
3. Turn on the power from the vehicle while the remote is flashing. After
turning on the vehicle, the lights on the remote will stop and stay lit. This
indicates the pairing has been successful and connected to your vehicle.
Remote Instructions:
“S” Key: Speed button; adjust the speed from low, medium, or high. The
light on the center of the remote will indicate the speed level.
“P” Key: Park button; disable the vehicle’s movement and stay parked. The
car will not run with the pedal or remote. To enable power, press the “P”
button again.
2.4GHz Remote Control Pairing Procedures
Summary of Contents for VOLTZ TOYS 80001
Page 4: ...3 PARTS LIST...
Page 19: ...18 25kg...
