background image

 

ENGLISH 

 

62 

 

10 MAINTENANCE 

 

Disconnect the power supply before starting any work on the system.

 

 
The system requires no routine maintenance operations.  
 
Periodically inspect and clean the pump filter. 
 

We suggest special maintenance at least once a year by qualified personnel. 

 
 

11 DISPOSAL 

This product or its parts must be disposed of in an environment-friendly manner and in compliance with the local 
regulations concerning the environment. Use public or private local waste collection systems. 
 

12 GUARANTEE 

Any use of faulty material or manufacturing defects of the appliance will be eliminated during the guarantee period 
contemplated by the law in force in the country where the product is purchased, by repair or replacement, as we 
decide.  
The guarantee covers all substantial defects that can be assigned to manufacturing faults or to the material used if the 
product has been used correctly, in accordance with the instructions.  
The guarantee is void in the following cases:  

• attempts to repair the appliance,  
• technical alterations to the appliance,  
• use of non-original spare parts,  
• tampering,  
• inappropriate use, for example industrial use.  

Excluded from the guarantee:  

• parts subject to rapid wear.  

When making a request under guarantee, apply to an authorised technical assistance service, presenting proof of 
purchase of the product. 
 

Summary of Contents for E.SWIM


































Reviews: