15
During operation, the system emits a bright, flashing light at the tip. Although
the system complies with IEC 62471 (Phenomenological Safety of Lamps and
Lamp Systems), prolonged exposure to flashing light may result in discomfort,
seizure, or eye irritation.
Prevention of cross contamination
• For each new patient, perform cleaning and disinfection procedures as instructed in this manual.
Appropriate cleaning and disinfection measures must be taken to avoid
crosscontamination between patients, users, and other people.
To maintain patient safety, wear surgical gloves when handling any part of the
system. Always verify that the tip is mounted on the handpiece before inserting
it into the patient's mouth. Before using the system with a new patient, ensure
the system is disinfected and the tip sterilized.
After using / operating the equipment
• Turn off the equipment if not in use for a long time.
• All parts that have come into contact with the patient must be cleaned and disinfected with each
new patient to prevent transmission of infectious agents that can cause serious illness.
• Carry out cleaning and disinfection according to the instructions contained in this manual.
• Do not disconnect the cable or other connections unnecessarily.
• Do not modify any part of the equipment.
• When not in use, always rest the handpiece on the base. Do not place the base on an inclined
surface. Place cables (power cord and USB cable) where people cannot accidentally get caught in
them and potentially damage the system.
Precautions in case of alteration of the equipment operation
If the equipment shows any abnormality, check if the problem is related to any item listed in the
“Troubleshooting” topic of this user manual.
If it is not possible to solve the problem, turn off the equipment, contact an Alliage's Authorized
Technical Assistance.
The manufacturer is NOT responsible for:
• The equipment is used for purposes other than those for which it was designed.
• Damage caused to the equipment, the operator and/or patient, because of
incorrect installation and maintenance procedures not in accordance with the
operating instructions accompanying the equipment.
Summary of Contents for eagle.IOS
