AN3012DAB Installation Guide
-3-
1.3 A Pillar and Windshield
The windshield usually has a black enamel band along the edges that contains a
border of dots and a black-shade area, the Signal Booster is to be installed next to
the dotted area along the side of the windshield. Open the A Pillar cover; the black
copper strip of the DAB antenna is to be installed on the metal frame inside the A
Pillar cover.
1.4 Fit the DAB antenna
As the DAB antenna is designed to be attached once only, if the DAB antenna is
removed, it will not adhere again; therefore, it is recommended that you try fitting
the DAB antenna on the chosen location first before attaching the antenna
permanently.
a. Fit the Antenna for a location according to 1.1 to 1.3 above.
b. Mark the position of Signal Booster on the windshield for permanent
installation.
Dotted Area
Black Shade
A Pillar
5 cm
Metal Frame of A Pillar
LEFT
RIGHT
Left Mount
UV Protection Layer
