DAC Monitoring and Control System
User Manual Data Logger and Tower Meter
DL-PDL_General-User-Manual
_ve_2-0-2.docx
Page 22
9.3 Configuration of the DL/PDL
9.3.1 General
Caution:
If the measured voltages are not displayed, the trend curves for voltage are
suppressed. The following trends are available: Sensor - PTx and return loss/VSWR; RF-
Detector - PTx only; Temp.-Detector - temperature only
Caution:
Before disconnecting the power
,
click on the shutdown button
and wait until
shut down message to disconnect the power is displayed.
Caution
In case of Mobile Data Connection and activation of the Analytics-SW
synchronisation, saving the DL/PDL configuration is only possible if the
JB/PDL Polling Rate
is equal or longer than 60 seconds
. This will ensure that the used bandwidth with a mobile data
connection per month is in a reasonable range (one digit Mbit/s).
Sub-Menu as
Tabs to configure
the DL/PDL.
Automatically
the system
generates a
unique ID for
this DL/PDL.
With this button the configuration
information of all system elements are
exported into a pdf file, which can be
printed or stored for documentation
reasons.
Choose return loss or
VSWR format for the
display of the values
in the dashboard.
If this checkbox
is activated, the
gauge for the
sensors on the
dashboard is
reversed.
License Key:
DAC System
generates this
unique license
key; upgrade is
possible any
anytime.
Clicking this button will
shutdown
the
OS and the DL/PDL safely, please
follow the instruction of the displayed
windows.
Set default Thres-
hold values.
Functions
enabled with
license key.
If this checkbox
is activated,
open alarms are
closing
automatically if
the failure
disappears.
Choose Temper-
ature display in
Fahrenheit or in
Celsius.
Set polling Rate
for all Monitoring
Points in the
system.
With this function, it can be decided if
the measured voltages are displayed in
the dashboard or not.
The user can
set the min. and
max value of
the gauge
meter and
decide on the
split displayed.
Set the
properties of this
DL/PDL. Enter
all data for
traceability.