DAC Monitoring and Control System
User Manual Data Logger and Tower Meter
DL-PDL_General-User-Manual
_ve_2-0-2.docx
Page 85
Configuration of the Tx interface:
Note 3
: The interface has 2 positions, position 1 and position 2.
The position relates to the
OID command active or not active 0 or 1 or vice versa
. Each position can be named,
this name is shown with the position reading.
Very importantly the default position
is
selected and relates to the rule condition NOT activated (everything ok).
Note 4: If the Tx Interface is used in a rule, the interface cannot be disabled.
Caution
Toggle
the ATSB / Tx Interface is used in the commissioning mode, testing the function. After the
“Normal” operation starts the toggling is very critical, it directly commands the transmitter and
conflicts with the rule engine, therefore an inconsistency alarm is raised.
With double click the interface
configuration menu is started:
Name (default No.)
OID is set acc. to the OID
command for the transmitter
Interface logic
(Note 3
)