2. Cautions
For running this product’s functions correctly and safe use, please carefully read and
understand the following details before you use this product.
You must not use this product for any other purpose apart from the contents mentioned
in this manual. Please do not attempt to try any altering on this product.
2-1. Set-up Caution
•
Please avoid any place with water.
•
Please locate this product in the place without vibration or impact and humidity with
high temperature. For installation, please avoid a direct ray of light and dust. Do not
let this product contact with air including ion or salt.
•
Please do not use this product in the place with inflammable gas or steam or dust.
•
Please use 4-wire shield cable for sensor cable. If you use cable too long, measuring
error can be occurred due to the resistance of wiring.
2-2. Catuion for use
Please wait until it becomes stable to input idle condition and real-weight load during
calibration. If you press Enter Key before it gets stable condition, calibration error
might be occurred.
3
Please do not press any Key during using this product. (Refer to 6. Set up mode and
7. Calibration for function and specification of each key)
