4. Front Panel
4-1. Display Window on Front Panel
① Load Display
②,③,④,StatusDisplay
LED
⑤ Power Switch On/Off
⑥ Function Key/ZERO Key
⑦ Enter Key / HOLD Key
⑧ Shift Key / READ Key
⑨ Up Key / SAVE Key
4-2. 표시창의 기능 설명
① Load Display LCD : Displays Load DATA or Set Point.
② LB Display LED
: LED is lighted up when battery is Low battery.
③ TX Display LED
: LED is lighted up when RS232C(Communication) is transfer .
④ HOLD 표시 LED : LED is lighted up when Load data is in HOLD mode.
⑤
key : Power on/off. (It stays on when power key is pressed for 3 seconds.)
⑥
key : iThis key can be used to be out of Set-up mode (or to return to
Measuring Mode) as ESC. Also, it can be used to set the
display value as ZERO regardless of data value.
⑦
key
: It is used to set and save each set-up value as Enter key.
Also use HOLD/RESET KEY.
⑧
key : It is used to move action value of the flickered numbers when set up.
READ key function. Functio
⑨
n that can confirm storing Data (A001 ~ A500).
or increasing 1 for actio
key
: Key f
n value of each number chosen.
5
SAVE key function. Sequentially save Data (A ~ A 500)
