Griddle Placement and Use
Page 2
Instructions
STEP 1
Before using the griddle for the first time, wash it in hot soapy water. Rinse it and allow it to dry
thoroughly.
STEP 2
Make sure all burners are off and the cooktop or range is cool to the touch. Put the griddle over
the top of the grates on the cooktop or range. The correct position varies with the cooktop or range
model number
. To prevent damage to the griddle, see the diagrams below and on the facing page
to determine the correct position according to model number. When putting the griddle in place
make sure the grease trap is toward the back. Fit the tabs that stick out of the bottom of the feet
into the inside corners of the grate. When correctly installed, the griddle will rest securely about
1/2” above the top surface of the grate. It may rock back and forth slightly, which is normal.
STEP 3
Set one of the burners under the griddle to the light (high) position. Once lit, turn
the knob to the
MAX GRIDDLE
position, or lower if desired.
DO NOT
keep the
burner knobs higher than the
MAX GRIDDLE
setting after they are lit!
STEP 4
Repeat step 3 for the other burner under the griddle.
STEP 5
During cooking be careful with metal utensils on the surface because they can
scratch the non-stick coating.
After each use, wash the griddle thoroughly in hot soapy water to avoid stains from grease build-up. The griddle
is coated with a non-stick coating for easy cleaning. Warm water and liquid detergent are all that are needed
for cleaning. Remove stubborn spots with a non-abrasive plastic mesh pad. To prevent scratching, do not use
abrasives or abrasive cleaners.
DYRTP366, DYRTP486, EG366 and
EG486 Cooktops (center burners)
Grease trap
toward back
Put over
center burners
Line up bottom
of griddle with
top of grate
Cleaning the Griddle
DRT304 Cooktop
(right burners)
Grease trap
toward back
Put over
right burners
Line up bottom
of griddle with
top of grate
Light position
Model EG366 shown. Size and
style varies with model.
