3.
Turn the Torx T20 screwdriver counter
clockwise as shown to remove the rear
foot.
4.
Find the sub foot in the installation
kit. Insert the sub foot into the hole of
the rear foot’s place, and then turn the
screwdriver clockwise to tighten the
sub foot.
5.
When the sub foot is fixed, turn the
front foot to align with the sub foot.
Fine-tuning will be done in STEP 8.
CAUTION
Use caution when moving the dishwasher.
Do not drag the dishwasher on the floor.
This can damage the front and sub foot.
English
20
Ins
tallation
Installation
DD68-00250L-00_IB_DACOR_DW8700B_EN.indd 20
2024-01-11 3:09:28