English
74
Tr
ouble
shoo
ting
Troubleshooting
Information codes
If the dishwasher fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code
Action
LC
Leakage check
• Close the water supply valve. Go to your home’s circuit breaker panel,
and set the dishwasher’s circuit breaker switch to off. Then, contact the
installer to repair. If the issue continues, contact a local Dacor customer
center.
4C
Water supply check
• Check if the water supply valve is closed, if the water supply is
suspended, or if the water inlet valve or line is frozen or clogged by
foreign particles. If the issue continues, contact a local Dacor customer
center.
5C
Drain check
• Close the water supply valve. Check if the drain hose is clogged or
folded. Check if the drain hole inside the pump is clogged. If the issue
continues, contact a local Dacor customer center.
HC
High temperature heating check
• Functional check. With the dishwasher empty, add detergent, and then
run a cycle. If the issue continues, go to your home’s circuit breaker
panel, and set the dishwasher’s circuit breaker switch to off. Then,
contact a local Dacor customer center.
3C
Pump operation check
• Functional check. Turn off the dishwasher and restart. If the issue
continues, contact a local Dacor customer center.
AP
Connect with a smart phone.
• When the control panel displays ‘
AP
’, press and hold
Smart Control
on
the control panel to connect your dishwasher with your smart phone.
DD68-00250L-00_IB_DACOR_DW8700B_EN.indd 74
2024-01-11 3:09:44