ENGLISH
3
3.
Select desired mounting height and fix the lower
vertical supports to the upper vertical supports with
16 - 4.2 x 8 mm screws.
4. Install another horizontal support just above the top
part of the lower vertical supports with 24 - 4.2 x 8
mm screws.
5. Fix the hood motor (only for two fan model) or the
hood assembly (only for one fan model) to the lower
vertical supports with 32 - 4.2 x 8 mm (two fan model)
or 16 - 4.2 x 8 mm (one fan model)screws according
with the hood Installation Instructions.
6. Place each part of the inner support on the structure
with 2 - 4.2 x 8 screws. Make sure the inner supports
are the closest possible to 45º regarding vertical
supports.
45º
7. Assemble the internal supports of the structure as
indicated in the figure. Fasten them with 2 - 4.2 x
8 screws in the central part. You can elongate this
supports, depending on your structure height.
36” Hood
Min. height Max. height
51 ¹/₄”
(130.2 cm)
79 ¹/₄”
(201.3 cm)
42” and 54” Hoods
Min. height Max. height
50 ¹/₄”
(127.6 cm)
79 ¹/₄”
(201.3 cm)
NOTE
Locate 2 or 3 inner support on each inner side of the
structure according with the selected mounting height.
For a maximum of every 15
3
/₄
” (40 cm) of height, an inner
support must be installed on each side of the hood.
Installation
