ENGLISH
17
Installation
WARNING
ELECTRICAL SHOCK HAZARD.
WARNING
ELECTRICALLY GROUND FAN.
CONNECT GROUND WIRE TO GREEN AND YELLOW
GROUND WIRE IN TERMINAL BOX. FAILURE TO DO SO
CAN RESULT IN DEATH OR ELECTRICAL SHOCK.
7. Connect green (or bare) ground wire from home
power supply to yellow-green ground wire (E) in
terminal box using UL listed wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Reconnect power.
Install the double fan hood
1. Place the template in the ceiling considering the
instructions for ceiling support structures.
NOTE
Always consider the front of hood when placing the
template on the ceiling. It will define the control’s
location.
2. Mark with a pencil the hole locations for screws and
duct in the ceiling. Remove the template.
3. Fix one duct cover extension on each of both sides
of the horizontal support with 4 - 4.2 x 8 mm screws
using the Torx 20 adapter.
B
A
C
C
A. Horizontal support
B. Duct cover extension
C. 4 - 4.2 x 8 mm screws
4. Fix the horizontal support to the ceiling with
4 - 5 x 45 mm screws. Use 8 x 40 mm anchors if
necessary.
