6
7
Cleaning and Maintenance
Maintenance
LIGHT BULB REPLACEMENT
Light bulb replacement is considered to be a homeowner
maintenance operation. If all of the lights do not work,
before replacing any bulbs, check to make sure that the
main circuit breaker (or fuse) and the main power switch on
the hood are on.
Replace the light bulbs only with Dacor Part No. 101944,
available from any authorized Dacor parts dealer.
IMPORTANT:
Do not touch the replacement halogen light bulbs with
•
your fingers. Halogen bulbs are sensitive to the oils
from your hand. The oils from your hand will stick to the
bulb and cause it to burn out faster than normal.
Do not pry out the entire light fixture
•
A
, when replacing
the light bulb. It is difficult to reinstall. Pry out only the
the lens retaining ring
B
, which is the inner metal ring
attached to the light fixture.
Turn off the main power switch. See page 3 for the
1.
location.
Hold the lens retaining ring
2.
B
and lens in place with
one hand while prying the edge of the ring loose
with a small screwdriver or plastic knife. If you use
a screwdriver, cover the end with tape to prevent
scratching.
WARNING
To prevent electric shock turn off the main power
•
switch.
To avoid personal injury, make sure the cooktop or
•
range, the hood and the light bulb are cool before
changing the light bulb.
Once the lens retaining ring and lens are removed, pull
3.
the old bulb
C
sideways, out of the socket.
Using a glove, insert the new bulb into the socket. Line
4.
up the prongs on the new light blub with the holes in
the light socket. Gently push in on the new bulb until it
stops.
Center the lens
5.
D
on the lens retaining ring
B
and
snap it back into place on the light fixture
A
.
Turn on the main power switch. Touch the light key to
6.
make sure it is working.
REPLACEMENT PARTS
DACOR PART #
DESCRIPTION
101944
Light bulb
101952
Filter
A
B
A
D
B
C
