20
Installation Instructions
Adjusting the Door Height
If the height of the refrigerator and freezer doors does not
align, either door can be adjusted.
If the doors are adjusted too far, the sensors can fail to
detect the doors.
1. Remove the bottom grill. Be carefull not to scratch the
stainless steel surface while removing the screws.
2. Use the wrench tool on the bolt to adjust the door.
Turn the bolts clockwise to raise a door; turn
counterclockwise to lower a door.
3. Lay a level on top of the door seam to make sure the
doors are aligned.
4. Attach the bottom grill using the previous screws.
Removing the Bottom Grill
Adjusting the Door
Height
Loosening the
Hardware
1. Remove the bottom grill. Be carefull not to scratch the
stainless steel surface while removing the screws.
2. Use the wrench tool on the lock-nut while you
3. Insert a 6 mm Allen wrench inside that lock-nut.
4. Turn clockwise to raise the door.
5. Lay a level on top of the door seam to make sure the
doors are aligned.
6. Attach the bottom grill with previous screws.
Freezer Door
Wrench Tool
6 mm Allen wrench
Phillips screwdriver
Tools Needed:
AVERTISSEMENT
Risque de basculement
Le réfrigérateur est lourd au sommet et bascule
facilement lorsqu'il n'est pas complètement installé.
Garder les portes fermées avec un ruban adhésif
jusqu'à l'installation complète du réfrigérateu
r.
Utiliser deux ou plus de pe
rsonnes pour déplacer et
installer le réfrigérateur.
Le non-respect de ces instructions peut causer un
décès ou une blessure grave.
Refrigerator Door
WARNING
Tip Hazard
Refrigerator is top-heavy and tips easily when not
securely installed.
Keep doors taped closed until refrigerator is in its final
position and ready to be secured in place.
Use two or more people to move and install refrigerator.
Failure to do so can result in death or serious injury
.
