22
Adjusting the Door Gap
Installation Instructions
Left-Side Door Adjustment Hardware
The gap between the doors is factory set to 5/16 (8 mm)
before shipping. If the doors get misaligned and this gap
needs to be reset, follow these instructions
to adjust the
left-side, freezer door.
Freezer Door
1. Refer to the images at the right while following these
steps:
2. Remove the top grill. (Refer to page 15.)
Be carefull not to scratch or bend the stainless steel
while removing the screws and unhooking the grill.
3. Remove the screen.
4. Familiarize yourself with the hardware on the front left
of the refrigerator. This is where the adjustments to the
left (freezer) door will be made.
5. Move
bolts (A)
into
slots (B)
, and lightly tighten them.
6. Loosen the
lock-down bolt (C)
. This will free the door
to move.
7. Turn the
adjuster nut (D)
to move the door.
• Turn twice to move the gap 1 mm.
• Turn counterclockwise to move the door toward
the outside.
A
D
B
C
Secured setting (no adjusting allowed)
Allows for adjusting
Lock-down bolt
Adjuster nut
10 mm crescent wrench
Phillips screwdriver
Tools Needed:
