21
Refrigerator Use
Replacing the Water Filter
Inserting a New Water Filter:
1. Remove the wrapping from the filter.
2. Lubricate the O-rings with water.
3. Align the "T" shape tip of the water filter with the
valve.
4. Insert the water filter, and gently push it forward
until it stops.
5. Lift the filter until it stops.
6. Lift the cover and lock it into place.
7. Flush the water system:
About 2.5 gallons of water should be flushed
from the system to remove trapped air and
contaminants.
Dispense water for about 5 minutes by
starting
and stopping intermittently:
ON=30 seconds; OFF=60 seconds.
Aligning and Inserting the New Filter
Lifting the Filter and Cover
Flushing the Water System