18
Installation Instructions
Cooktop Assembly
WARNING
Never attempt to operate the range’s cooktop with any of the
burner rings, burner caps or grates removed.
•
Remove the burner rings, burner caps and grates from their
shipping packages.
•
Install the burners as shown. Either type (color) of the
supplied burner caps may be used. When installing the
burner components, twist each piece back and forth slightly
until it drops completely into place. The burners will not
operate properly unless all of the burner pieces are properly
seated.
•
Gently set the grates on top of the spill tray. Put the legs of
each grate inside the corresponding dimples.
SimmerSear Burner Installation
Standard Burner Installation
STEP 1
: Install
burner head. Put
locating tab in
keyed hole.
STEP 1
: Put burner
ring on top of head.
STEP 2
: Install
burner ring. Line up
ring tabs with head
slots.
STEP 2
: Turn ring until it
drops into place.
STEP 3
: Install burner
caps. Ridge on cap must
surround top of ring.
STEP 3
: Install burner
cap. Ridge on cap must
surround top of ring.
Burner
head
Burner ring
Burner
ring
Ridge on
bottom of
burner cap
Burner base
Burner head
SimmerSear
burner
Standard
burner
Spill tray
Ridge on
bottom of
burner cap
Keyed
hole
