background image

25

Problem

May Be Caused By

What to Do

System is noisy.

Cooling fans set too high.

See page 15 to change the fan setting. 

NOTE: Changing the fan setting may extend 

the time it takes for the bottle bay to cool 

after door openings and closings.

Bottle will not slide into 

bottle bay.

Cap on clean pour head mis-

aligned.

Check that the cap and rotor switch are in the 

correct position. See page 9.

Wine comes out during 

purge or clean process.

New wine bottle is very full.

Sometimes if a new wine bottle is very full, a 

little wine will come out during the purge or 

clean process. This is normal.

Hissing noise.

Normal sound at end of wine 

dispensing, purge or clean 

function.

Hissing sound is normal during these normal 

system operations.

Argon gas leak.

If hissing is coming from gas line. Remove 

gas cylinder from regulator and call Dacor for 

replacement gas line.
If hissing is coming from regulator area. 

Check to make sure gas cylinder is connected 

firmly to regulator. If hissing continues, 

remove gas cylinder from regulator and call 

Dacor for replacement regulator assembly.

Suspected gas leak/Gas 

cylinder emptying too 

quickly.

One or more dispensing head 

caps loose.

Check all dispensing heads to ensure that the 

caps are correctly engaged and secure.

Leak in gas supply system.

Run gas leak test (see page 11). Call for 

service if test fails.

Before You Call for Service

Warranty and Service

Getting Help

Before you request service:
1.  Review the 

Before You Call for Service

 sec-

tion of this manual (page 23). 

2.  Use the helpful tips found in our 

Problem Solu-

tion Guide

.

3.  Become familiar with the warranty terms and 

conditions of your product on the following page.

4.  If none of these tips or suggestions resolves 

your problem, call our Customer Service center 

at the number shown.

Dacor’s Customer Service center is available 6:00 

A.M.

 – 5:00 

p.M.

 pacific Time

For warranty repairs or questions and for Dacor Dis-

tinctive Service (DDS) in the US and Canada
phone: (800) 793-0093, extension 2822  

For non-warranty repairs or questions in the US and 

Canada
phone: (800) 793-0093, extension 2813
Contact us through our web site at:
www.dacor.com /contact-us

Summary of Contents for Discovery DYWS4

































Reviews: