background image

1

Important Information About 

Safety Instructions

•  The 

Important Safety Instructions

 and warnings in 

these instructions are not meant to cover all possible 

problems and conditions that can occur. Use common 

sense and caution when installing, maintaining or 

operating this or any other appliance.

•  Always contact the Dacor Customer Service Team about 

problems and conditions that you don’t understand. See 

Customer Service Information

.

Important Safety Instructions

Safety Symbols and Labels

 DANGER

Immediate hazards that 

WILL

 result in severe personal 

injury or death.

 WARNING

Hazards or unsafe practices that 

COULD

 result in severe 

personal injury or death.

 CAUTION

Hazards or unsafe practices that 

MIGHT

 result in minor 

personal injury or property damage.

 WARNING

IMPORTANT:

 This appliance is equipped with a three- 

prong grounding electric plug for protection against 

possible electric shock hazards. It must be plugged into a 

dedicated, grounded, electrical outlet. If only a two-prong 

electrical outlet is available, it is the responsibility of the 

customer to have it replaced with a dedicated, properly 

grounded three-prong electrical outlet. 

• 

DO NOT 

cut or remove the third (ground) prong from 

the power cord.

• 

DO NOT 

use an adapter plug.

• 

DO NOT 

use a power cord that is frayed or damaged.

• 

DO NOT 

connect the appliance to an extension cord.

•  Keep the power cord away from heated surfaces.

NOTE:

 Use of an electrical outlet with a ground fault 

interrupter (GFI) is not recommended.

READ AND SAVE THESE INSTRUCTIONS

 DANGER

IMPORTANT

: To prevent child entrapment and suffocation 

when discarding an old appliance:

•  Take off the door(s).
•  Leave the racks in place so children cannot easily 

climb inside.

•  Cut the prongs off the power plug and discard them.
•  Cut the power cable off and discard it separately from 

the old appliance.

IMPORTANT:

 To avoid the possibility of explosion or fire, 

do not store or use combustible, flammable or explosive 

vapors and liquids (such as gasoline) inside or in the 

vicinity of this or any other appliance.

State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals 

known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals 

known to the State of California to cause birth defects or 

other reproductive harm.

Power cord with three- 

prong grounding plug

Grounded type  

electrical outlet

Summary of Contents for Discovery series

























Reviews: