7
Grate Installation
Gently set the grates on top of the spill tray. Put the legs
of each grate into the corresponding dimples.
Cooktop Assembly
WARNING
• Assemble the burners and grates only when the
cooktop is cool.
• If you have the optional Dacor grill or griddle,
installing the range knobs in the wrong position may
result in damage to it.
Remove the burner rings, burner caps and grates from
their shipping packages.
SimmerSear Burner Assembly
1. Install the SimmerSear burner ring on top of the
SimmerSear burner base. Line up the indentations on
the bottom of the ring with the pins on the base.
2. Set the outer SimmerSear burner cap on top of the
burner ring. Make sure it is centered on top.
3. Set the inner SimmerSear burner cap on the center of
the burner base. Line up the ridge on the bottom of
the cap with the pins on the center of the base.
Setting Up Your Range
Standard Burner
Assembly
SimmerSear Burner
Assembly
Outer burner
cap
Ridge on bottom
of burner cap
Igniter
hole
Igniter on
burner base
Burner
ring
Burner
ring
Ridge on bottom of on
inner burner cap
Pin on burner base
Standard Burner Assembly
1. Install the standard burner rings on the standard
burner bases. Match the different sizes. Put the hole
on the edge of each ring over the igniter. Center the
tabs on the bottom of each ring in the hole in the
center of each base.
2. Install the standard burner caps. The ridge on the
bottom of each cap must surround the top of each
ring.
Summary of Contents for Distinctive DR30D
Page 2: ... 2010 Dacor all rights reserved ...
Page 34: ...32 Notes ...