6
Installing the Spacers
Plastic spacers are used to ensure the
required distance for air circulation between
the back of the refrigerator and the rear wall.
1. Remove the existing screws on the back
of the refrigerator.
2. Install the spacers using the included
screws.
Verify the Package Contents
Verify that all the components shown below
have been provided. If any item is missing
or damaged, please contact your dealer
immediately. Do not install a damaged or
incomplete appliance.
1.
Water filter
2. Plastic spacers (2)
3. Screws for plastic spacers (2)
Before Installation
Make sure that you have everything
necessary to ensure proper installation
before proceeding, including:
•
Adjustable wrench
•
1/4” (6 mm) copper tubing for the water
line
•
Copper tubing cutter
•
Compression nut and compression
sleeve to connect to the refrigerator
water inlet
•
Compression nut and compression
sleeve to connect to the water supply
valve
1
2
3
Installation