6
Care and Cleaning
Maintenance
Cleaning the Stainless Steel
Clean stainless steel surfaces with a mild solution of
dishwashing liquid and warm water.
ALWAYS WIPE WITH THE GRAIN OF THE STEEL.
Do not use abrasive cleaners or abrasive cloths.
Rinse and dry with a micro-fiber cloth or other lint-
free cloth.
We recommend Dacor Stainless Steel Cleaner. Use it
according to the directions on the package
Replacing the Light Bulbs
Light bulb replacement is considered to be
homeowner maintenance. Before replacing any
bulbs, or if any light does not work, check to make
sure that the power is ON at the circuit breaker, fuse
box, or light swich.
If you are replacing the bulb outside of Dacor’s
service, please bring the bulb with you to avoid any
compatability problems.
SPECIFICATIONS
:
Dimmable Halogen 75W 120V
or Dimmable LED 7.5W (75W Max) 120V
PAR16, E26/27, 500 lumens
Replacing the Light Bulbs
1. Turn the power OFF at the circuit breaker or fuse
box. (This avoids damage if a short occurs.)
2. Gently push the suction cup tool
A
(provided
with your range hood) onto the lens of the light
bulb.
B
Make sure the lens is grease-free.
3. Turn the tool
left
to loosen the bulb.
4. Remove the tool and bulb.
5. Insert the replacement bulb inside the housing and
tighten. If the bulb remains loose:
6. Attach the suction cup to the lens of the replace-
ment bulb.
C
Make sure the lens is grease-free.
7. Tighten this new bulb into the housing. Twist
right
until it is tight.
8. Remove the suction cup from the bulb.
9. Turn the power ON at the fuse box or circuit panel.
Dacor Replacement Parts
To order replacement parts directly from Dacor,
refer to the tables on the right for light bulb kits and
filter kits.
Visit us at www.everythingdacor.com.
Dacor’s Customer Service center is available
6:00
a
.
m
.
– 5:00
p
.
m
.
Pacific Time
Phone: (800) 793-0093, extension 2813
Inserting the Bulb
C
Removing the Bulb
A
B
WARNING
• To prevent electric shock or damage to the electrical
system, turn power OFF at the fuse box or circuit
breaker panel before replacing the light bulb.
• To avoid the risk of fire, do not use any light bulb
stronger than 75W, 120V.
• Use a dimmable bulb.
• To avoid personal injury, make sure the hood and the
light lens are cool before changing the light bulb.
Dacor Part
Number
Filter Kits
702586
Mesh Filter (1 complete filter)
702579
Baffle Filter (1 pc + hardware)
702580
Baffle Filter (2 pc + hardware)
Dacor Part
Number
Light Bulb Kits
Tip#1
Replace all bulbs
when changing from
Halogen to LED because the difference in color
and luminosity varies between the two types.
Tip#2
Use dimmable bulbs.
Halogen bulbs are
dimmable by default but might not indicate this
on the packaging.
700975
Halogen 75W Bulb Replacement Kit
(1 bulb + 1 suction cup tool)
702666
Dimmable LED 7.5W Bulb
Replacement Kit
(1 bulb + 1 suction cup tool)
