English
English
76
77
Care and maintenance - Cooktop
Care and maintenance - Cooktop
Care and maintenance - Cooktop
WARNING
Be sure electrical power is off and all surfaces are cool before cleaning any part of the
cooktop. Wearing gloves is mandatory while cleaning. Some burners and cooktop parts
have sharp edges. Be careful while cleaning.
Cleaning the cooktop surface
You should clean up spills as soon as possible.
1.
Turn off all burners.
2.
When the grates have cooled
sufficiently, remove them.
3.
Clean the cooktop surface with a soft
cloth. If spills run into gaps in the
burner components, remove the burner
gaps and head, and wipe up the spills.
4.
When finished cleaning, reassemble the
burners, and reposition the grates.
CAUTION
Do not wash burner grates in dishwasher.
Stainless steel surfaces
1.
Remove any spills, spots, and grease stains using a soft, wet cloth.
2.
Apply an approved stainless steel cleaner to a cloth or paper towel.
3.
Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
4.
Dry the surface with a soft, dry cloth.
5.
Repeat Steps 2 - 4 as needed.
CAUTION
• Do not use items (e.g., steel-wool pad, sharp scraper, abrasive cleanser, caustic
lye/sodium hydroxide), which can affect the appearance of the steel and damage
components.
• Do not remove the spill tray to clean it. The gas lines leading to the burner manifolds
can be damaged, possibly causing a fire or malfunction.
• Do not pour water into the cooktop. The water could drip into the gas and electrical
systems, creating an electric shock hazard or high levels of carbon monoxide (CO) from
corroded gas valves/ports.
• Do not spray any type of cleaner into the manifold holes. The ignition system inside
them must remain dry.
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 76-77
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 76-77
2023-01-17 오후 3:01:58
2023-01-17 오후 3:01:58
