Contents
English
English
8
9
Contents
Before you begin
Using the special function feature
Using the Smart Control feature
Settings 71
Using the hood control feature
Care and maintenance - Cooktop
Electrodes 81
Burner head and cap replacement
Before you begin
Important
• The overall design and/or accessories
may differ with the model.
Installer
• To promote safety and minimize
problems, read this manual thoroughly
before starting the installation. Leave
this manual with the user.
• Write the appliance’s model/serial
numbers in this manual for service/
maintenance reference.
User
• Keep this manual for personal reference
and for that of inspectors, service
personnel, etc.
Clean the oven thoroughly before using it for the first time. Then, remove the accessories,
set the oven to Bake, and then run the oven at 425 °F for 1 hour. There will be a
distinctive odor. This is normal.
Ensure your kitchen is well ventilated during this conditioning period.
About this manual
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.
Important note to the installer
• Read all instructions contained in these installation instructions before installing the
appliance.
• Remove all packing materials from the appliance compartments before connecting the
electric and gas supply to the appliance.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
• Installation of this appliance requires basic mechanical skills.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 8-9
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 8-9
2023-01-17 오후 3:01:50
2023-01-17 오후 3:01:50