English
30
Using the Refrigerator
Using the Refrigerator
-
TALR
(L4) mode automatically deactivates when the stipulated setting is reached
(max. 15 min.), or when the Override E-smart key is pressed. The mode deactivates
immediately, and the refrigerator returns to the normal state when the door is
opened/closed, or the dispenser is used.
Checking the MAC Address
1.
In this mode, the MAC address appears
on the temperature panel (freezer
and fridge sections of the panel)
sequentially for 1 minute.
Press-hold the
Freezer
and
Fridge
buttons simultaneously for 6 seconds.
The temperature panel blinks.
2.
Press
Freezer
again to display the MAC
address. The fridge beeps. (Ex.: if the
MAC address is "11-22-33-44-55-66",
the temperature panel displays the
address for 1 min. in this sequence:
"-- / --"
"11 / 22"
"33 / 44"
"55 / 66"
"-- / --". Then, the MAC
address disappears and the temperature
panel resumes its normal state.
NOTE
The temperature panel displays "-- / --"
for an unknown MAC address or if a Wi-Fi
connection is not established or is lost.
About Override E-smart Mode
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal
from the utility company, you can activate Override E-smart mode, in which the
refrigerator ignores the SMART GRID (Demand Response) signal and is not controlled by
the utility company.
TBI_Dacor_UserManual_DA68-03581B-00_EN.indd 30
2022-11-18 5:56:16
