English
17
Installation instructions
Connecting to the main water supply
5 3/4"
(146.1 mm)
3 3/16"
(81 mm)
6 1/8"
(155.6 mm)
19 1/4"
(489.5 mm)
2 3/4"
(70 mm)
1"
(25 mm)
Before connecting the refrigerator’s water
line to the house’s main water supply,
the house’s plumbing layout must be
understood.
1.
Decide the best way to utilize the
plumbing layout, then
2.
Tap into the main water line while
following these requirements:
- The installer must provide the 5/16-
in (8 mm) water line and all fittings.
- The water line must be long enough
to provide slack to allow the
refrigerator to be moved for floor
cleaning and servicing, without the
need to first disconnect the water
line.
- All new installations must meet local
plumbing code requirements.
- The water shutoff should be placed
in the base cabinet on either side
of the refrigerator (the right-side
is recommended) or in some other
easily accessible area.
- If the water shut-off valve is
placed in the back wall behind the
refrigerator, it must be at an angle
so that the water line is not kinked
when the refrigerator is pushed into
its final position.
- Make sure the water supply pipe
is within the range shown in the
illustrations at right.
TBI_Dacor_Installation_DA68-03583B-00_EN.indd 17
2022-11-18 6:16:08
Summary of Contents for DRS4253 Series
