English
22
Installation instructions
Installation instructions
Move to the anti-tip brackets
The specified height of the installed
refrigerator is 2075 mm, which is the
sum of the rear height (2068 mm) of the
refrigerator and the thickness of the anti-
tip bracket (7 mm).
1.
Fix the anti-tip brackets on the rear
wall using screws. To ensure proper
alignment, mark a line at the specified
height on the rear wall beforehand.
Height From
Floor to Anti-tip
Bracket 81 3/4”
(2075 mm)
2.
Tape the power plug to the top of the
refrigerator so that the plug does not
fall off.
3.
Move the refrigerator all the way back
to the anti-tip brackets until it fits in.
Make sure the refrigerator is secured to
the brackets.
CAUTION
While moving the refrigerator, use caution
not to pinch the power plug behind the
back of the refrigerator.
Connect power
• Connect refrigerator power cord plug to a properly earthed receptacle.
• Check to make sure power to refrigerator is on by opening refrigerator door to see if
interior lights are on.
TBI_Dacor_Installation_DA68-03583B-00_EN.indd 22
2022-11-18 6:16:09
Summary of Contents for DRS4253 Series
