English
11
Safety and Warning Information
Installation Safety
WARNING
•
Before installing the wine cellar, connect it to a power outlet and turn the wine cellar
ON to make sure the wine cellar is working.
•
Choose a location away from a heater, boiler, or direct sunlight.
•
Install the unit where air flows freely and where the wine cellar is well ventilated.
•
Install the unit so that air flows unobstructed through the front air grill. If the air
circulation is not ensured, it may interfere with the normal functioning of the product.
•
Outside animals (rodents) can chew on the power cord and cause a fire; therefore,
install the unit where there is no access to animals.
•
If the cabinet is made of soft material (ex: plaster, etc.), it can have a weak structure
and be damaged. Therefore, use a cabinet made of sturdy, strong material.
•
Install the wine cellar with a team of at least 2 people.
•
Refer to the dimensions of the cabinet and prepare the cabinet with good air
circulation.
•
Use cabinet that will not warp from product heat emissions or humidity from the
opening and closing of the wine cellar.
NOTE
This wine cellar is a “built-in” style wine cellar, meaning that the wine cellar requires
installation inside a recess in existing kitchen cabinetry.
Before moving the wine cellar, clear the route to the location where it will be installed.
Check all product dimensions and the tipping radius with any doorways, hallways, stairs,
corners, etc., to ensure a clear passageway.
WARNING
Tip Hazard
This appliance is relatively heavy on the top and prone to tip over when not securely
installed.
Keep doors taped closed until wine cellar is in its final position and ready to be secured
in place.
Use two or more people to move and install wine cellar.
Failure to do so can result in death or serious injury.
Summary of Contents for DRW24980RAP/LAP
Page 1: ...Installation Instructions Built In Wine Cellar DRW24980RAP LAP...
Page 69: ...Memo...
Page 70: ...Memo...
Page 71: ...Memo...
