English
40
Care and maintenance
Care and maintenance
Burner grates and components
Turn off all burners, and wait for them to cool.
2
3
1
7
6
8
1.
Remove the burner grates.
2.
Remove the burner caps from the
burner heads.
3.
Remove the burner heads from the
valve manifolds to reveal the starter
electrodes.
4.
Clean the grates and burner
components in warm, soapy water.
(Do not use steel-wool pads or
abrasive cleaners.)
5.
Rinse and dry grates and burner
components thoroughly.
6.
Reassemble the burner heads, making
sure to insert a starter electrode
through the hole in each head. (See
pgs. 43-46 for assembly directions.)
7.
Reassemble the other burner parts,
laying the caps flat on the heads.
8.
Place the burner grates in their
respective positions.
9.
Light, then turn off each burner to
verify proper function.
