English
23
Using the Refrigerator
Power Cool
The Power Cool function lowers the fridge temperature and speeds
up the cooling process. In the Power Cool mode, the fridge runs at full
power for several hours and then returns to normal operation and the
previous temperature setting. Use Power Cool to rapidly cool food
that spoils quickly or to rapidly cool the refrigerator after the door has
been left open for some time.
To start Power Cool, press and hold
Fridge
for 3 seconds. The Power
Cool icon lights and the refrigerator speeds up the cooling process.
To deactivate, press and hold
Fridge
for 3 seconds again. Power Cool
turns off and the refrigerator returns to the previous temperature
setting.
NOTE
Using Power Cool increases power consumption. If you do not need
the Power Cool function on, make sure you turn it off so that the
refrigerator can return to normal operation and the previous set
temperature.
03 Energy Saver / Override E-smart (3 sec)
Energy Saver
Use Energy Saver mode to reduce power consumption. Press
Energy
Saver
to turn on or off Energy Saver mode and the corresponding
indicator. By default, Energy Saver mode is enabled.
Override
E-smart
The Override E-smart function activates/deactivates Smart Grid.
Press
Energy Saver
for 3 seconds to set/clear the Override E-smart
function.
04 Door Alarm
Door Alarm
You can enable or disable the door alarm by pressing
Door Alarm
.
When Door Alarm is enabled and a door is left open for more than 2
minutes, the alarm will sound and the alarm indicator will blink. The
Door Alarm function is enabled by factory default.
TBI_Dacor_UserManual_DA68-03581A-04_EN.indd 23
2020-12-11 5:12:44