background image

1

Refrigerator Safety

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not 

completely installed. 
Keep doors taped closed until refrigerator is 

completely installed.
Use two or more people to move and install 

refrigerator.
Failure to do so can result in death or serious injury.

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Proper Disposal of Your Refrigerator

IMPORTANT:

 Child entrapment and suffocation are not problems 

of the past. Junked or abandoned refrigerators are still dangerous, 

even if they sit out for “just a few days.” If you are getting rid of 

your old refrigerator, please follow the instructions below to help 

prevent accidents.

Before you throw away your old refrigerator or freezer:

Take off the doors.

• 

Leave the shelves in place so 

• 

children may not easily climb 

inside.

WARNING

Suffocation Hazard

Remove doors from your old refrigerator. 
Failure to do so can result in death or brain damage.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: 

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions: 

SAVE THESE INSTRUCTIONS

 

Plug into a grounded 3 prong outlet.

 

Do not remove ground prong.

 

Do not use an adapter.

 

Do not use an extension cord.

 

Disconnect power before servicing.

 

 

Replace all parts and panels before operating.

 

Remove doors from your old refrigerator.

 

Use nonflammable cleaner.

 

Keep flammable materials and vapors, such as gasoline, 

away from refrigerator. 

 

Use two or more people to move and install refrigerator.

 

Disconnect power before installing ice maker (on ice maker 

kit ready models only).

 

 

Use a sturdy glass when dispensing ice (on some models).

Summary of Contents for EF36IWF













Reviews: