5
Disassemble the two top
7.
hinges as shown and lift each
door off the hinge pin.
Remove both top
4.
hinge covers as
shown.
Installation Instructions
Door and Drawer Front Removal
Some installations require door and drawer front removal before
transporting the refrigerator through doorways to the location
where it will be used.
IMPORTANT:
Keep the refrigerator doors closed until you are ready to lift
•
them free from the cabinet.
Provide additional support for the refrigerator door while the
•
hinges are being removed. Do not depend on the door gasket
magnets to hold the door in place while you are working.
Remove food and any adjustable door or utility bins from
1.
doors.
Unplug the power cord from the power source.
2.
Remove the base
3.
grille. Grasp the
grille firmly and
pull it toward you.
Lift the drawer front
12.
upward and off the
screws.
On some models, remove
8.
the shim from the bottom
hinge pins and keep them
for later use.
Remove the Phillips
9.
screws that hold the
center hinges in place.
Remove the hinges and
retain them and all screws
for later use.
Pull the freezer drawer
10.
completely open.
Loosen the four (4)
11.
screws attaching the
drawer brackets to the
drawer front as shown.
NOTE:
Loosen the
screws only three to four
turns. Do not remove the
screws from the drawer
front.
Remove the leveling legs
13.
brackets from the bottom of the
cabinet. Keep screws for later
use.
Center
hinge
Disconnect the wiring
5.
plug located on top
of the left hinge by
wedging a flat-blade
screwdriver or your
fingernail between the
two sections.
Disconnect the water
6.
line on top of the left
hinge by holding the
tabbed section of the
water line while turning
the black locking collar clockwise.
Tabs
Water
line
Wiring
plug
