26
Oven
Your oven’s self-clean feature eliminates the need for manual
scrubbing of interior surfaces. The steps below are for cleaning
surfaces and items that are not cleaned by the self-clean process.
To use the self-clean feature see page 23.
Convection Filter
The convection filter is located in the back of each oven chamber.
Clean the filter regularly. If you allow it to become clogged, the
oven’s convection cooking modes will not work properly. You also
need to remove the filter during the self-clean cycle.
Removing your oven’s convection filter:
When the oven is cool, put your fingers around the edges of the
filter and gently push up.
To clean the filter:
Soak it in hot, soapy water. Rinse well. You may also place it in a
dishwasher on the top rack. Dry the filter before re-installing it.
Installing your oven’s convection filter:
Carefully hook the metal clips on the back of the filter over the
metal bar across the fan hole. Make sure it is centered over the
hole. Be careful not to scratch the porcelain surfaces with the
back of the filter.
•
WARNING
To avoid electrical shock or burns, turn off the oven and be sure
that the oven is cool before cleaning.
WARNING
To avoid electrical shock or burns, turn off the oven and be sure
that the oven is cool before cleaning.
WARNING
For your safety and proper oven performance, re-install the filter
before using the oven to cook. If you don’t, the spinning fan
blades at the back of the oven will be exposed.
WARNING
For your safety and proper oven performance, re-install the filter
before using the oven to cook. If you don’t, the spinning fan
blades at the back of the oven will be exposed.
Control Panel
To avoid accidentally turning the oven on while cleaning the
control panel, activate the lock-out feature. Press the
CANCEL/
SECURE
key for six seconds. The lock-out feature disables the
keys. When the control panel is locked, the word “
OFF
” appears
on the display.
When you want to re-activate the control panel, press
CANCEL/
SECURE
for six seconds.
Clean the control panel with the soft side of a sponge dampened
with a mild solution of detergent and warm water. Dry the control
panel completely with a soft, lint-free cloth.
Stainless Steel Surfaces
Clean stainless steel surfaces with a mild solution of detergent
and warm water. Rinse and dry with a soft, lint-free cloth.
You may also use Dacor Stainless Steel Cleaner on the stainless
steel surfaces. Use it according to the directions on the package.
Brass, Chrome, & Copper Surfaces
Using a soft cloth, clean metal surfaces with a mild solution of
detergent and warm water. Rinse and dry with a soft, lint-free
cloth.
Glass (Interior and Exterior)
Use a mild glass cleaner to remove finger prints on glass
surfaces. You can also clean glass surfaces with Dacor Cooktop
Cleaning Creme. Use it according to the directions on the
package.
You may scrub the oven light lens with the rough side of a sponge
and warm, soapy water. Be careful not to scratch the lens.
CAUTION
Do not use abrasive cleaners or scrubbers on the control panel.
They will permanently damage the finish.
CAUTION
Do not use abrasive cleaners or scrubbers on the control panel.
They will permanently damage the finish.
CAUTION
Always wipe stainless steel (silver colored) surfaces with the
grain. To prevent scratching, do not use abrasive cleaners or
scrubbers on stainless steel surfaces.
CAUTION
Always wipe stainless steel (silver colored) surfaces with the
grain. To prevent scratching, do not use abrasive cleaners or
scrubbers on stainless steel surfaces.
CAUTION
To prevent scratching, do not use abrasive cleaners or
scrubbers on metal surfaces.
CAUTION
To prevent scratching, do not use abrasive cleaners or
scrubbers on metal surfaces.
Cleaning and Maintenance
Filter
Clips
Bar
