Page 2
Refrigerator Handle Kit Installation Instructions
STEP 2 Model IF36BNNF only:
Install the six (6) handle mounting studs in the locations shown
below. Use the screw type selected in step 1. The top handle mounting stud spacings are
30” (762 mm). The bottom handle stud spacing is 23 9/16” (598 mm).
Custom
panels
Double Sided Tape Locations
Model IF36BNNF Only
STEP 3 Model IF36BNNF only:
Install thin double
sided tape on either side of the mounting
studs as shown.
STEP 4 Model IF36BNNF only:
Install the custom
panels on the refrigerator doors according to
Dacor document 100504. Then, skip to step 9.
Handle Mounting Stud Locations
Model IF36BNNF
30”
(762 mm)
23 9/16”
(598 mm)