Page 6
Refrigerator Handle Kit Installation Instructions
Top Left Handle Installation (All models)
STEP 16
Mount the remaining handle to the left door
with the holes for the set screws toward the
center of the refrigerator. Loosen the sets
screws if necessary.
STEP 17
Open the left door while holding the handle in
place to prevent damage to the other handle
during step18.
STEP 18
Carefully tighten the set screws into place
using a 3/32” Allen wrench. Be careful not to
scratch the finish.
STEP 19
Check to make sure that the handle is firmly
attached.
Handle mounting
stud
Handle mounting
stud
Set screw
hole
Set screw
hole
