Refrigerator Trim Kit Installation Instructions
Page 3
IMPORTANT:
Once it makes contact with the top of the refrigerator, the trim cannot be removed
without damaging the foam tape. Read step 5 carefully before installing the trim assembly.
STEP 5
Install the trim assembly on top of the refrigerator. Line up the inner mounting holes in the
trim piece with the rear inner hinge screw holes on the refrigerator as shown. To help line
up both sets of holes, insert the hex head screws removed in step 3 into the trim brackets
as shown. Line the screws up with the holes as you lower the trim into place. Thread the
screws, then push down firmly on the base plate so that the tape on the bottom adheres to
the refrigerator.
STEP 6
Once the trim assembly is in place,
tighten both screws. Do not overtighten.
Line up
inner holes
Line up
inner holes
Top of
refrigerator
Base
plate
Screw removed in
step 3
Screw removed in
step 3
